Showing posts with label chain bracelet. Show all posts
Showing posts with label chain bracelet. Show all posts

6/05/2012

DIY: Ribbon and Chain Multi-strand bracelet

If you have been browsing around other DIY blogs, you may have seen this bracelet already but what makes it different here is that I used ribbons instead of leather cords. Using ribbons allows you to use brighter and bolder colors. See steps below!

Materials:
1. Super glue
2. 2 jumps and 1 clasp
3. File clip
4. Chains (19.5 inches or any length that will wrap around your wrist 3x) 
5. Ribbons (width of ribbon will depend on your chain, I think mine is 1/8 inch)
6. Pliers

Steps:
1. Attach the jumps and clasp at each end of the chain.
2. String the ribbon (the length of my ribbon measures about 2 1/2 times the length of the chain) into the first chain and tie 2 knots. Leave the other end of the ribbon hanging, this will later be cut off and glued.
3. String the ribbon onto the next chain, making sure that the ribbon goes over chain and is inserted into the hole. Once you get it through, make sure the ribbon is tight against the chain before moving on to the next. Also, make sure that you string the ribbon in one direction (lol ONE DIRECTION <3) so be sure to check the back side to avoid any ribbons from flipping.
4. As you continue stringing the ribbon, use a file clip so that the bracelet does not move around.
5.  Tie 2 knots once you reach the end
6. Cut the remaining ribbons left and glue to chain.

These bracelets are best when worn when stacked and can also double as a necklace as well. You can use different chain colors such as gold, bronze, black or silver to mix and match with ribbon colors. 

Get creative :)


4/17/2012

DIY: Chain Bracelet


I've been seeing lots of DIY chain bracelets using leather cords and decided to make one too. I used an old bracelet that I never wore. It's one of those free gifts you receive for every minimum purchase receipt. I have no idea what the Di stands for but kinda looks like Dior to me! LOL. 


There are only two materials needed, an old bracelet and leather cords. 

1-3. Since the chains of this bracelet are alternating, simply string one of the cords through the same chain. Blue cord strung into the chain facing sideways and keep going until you reach the end. Make sure you leave at least 3 inches of cord on both ends
4. String the other cord, orange cord, through the chain facing up, keep going until you reach the end. Make sure you leave at least 3 inches of cord on both ends 
5. Make a knot using both cords (blue and orange) against both ends of the chain. One knot is enough but you can always double knot it if you feel it is not enough.
6. This part is optional, I wanted to keep the cords dangling off the wrist so I left about 2 inches and tied a knot on each cord.  

when worn
My "Dior" LOL.
I think updating old items in your closet is a very practical thing to do! There is no need to keep buying new items and throwing the old ones out. The leather cords cost about P20 total which is about $0.50 !

  How do you update your old accessories? :)